Product detail

Claw of the Wyrm Karambit

Item DMC-STL-000725 · Jewelry & Wearable Accessories · Drop #271

Jewelry & Wearable AccessoriesEstimated from $34.99STL #3396Drop #271

Ready to print this?

Choose size, material, color, finish, and quantity on the quote request.

Print This

Product information

Claw of the Wyrm Karambit

Dark, primal, and untamed. Forged in the spirit of ancient beasts, it tears through shadow and steel alike.

Item number: DMC-STL-000725
Category: Jewelry & Wearable Accessories
STL catalog #: 3396
Drop collection: Drop #271
Approx. size: Height: 15 cm
Print time: 02 Hours 23 Minutes
Multipart time: 03 Hours 42 Minutes
Multicolor time: 19 Hours 27 Minutes
Nozzle: 0.4 mm
Layer height: 0.2 mm
Walls: 3
Infill: 5% (Gyroid)
Supports: No
Plate adhesion: No
Hardware: Not listed
Material options: PLA, Silk PLA, Resin, PETG

Production notes

The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
(FOR 0.4 MM NOZZLE) Line Width/ Nozzle: 0.4 mm First Layer Line Width: 0.48 mm / 120% Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab) Recommended Initial Layer Height: 0.2 mm Recommended Layer Height: 0.2 mm Recommended Perimeters/ Walls: 3. Recommended Infill (%): 5% (Gyroid) Needs Support: No. Build Plate Adhesion: No. Others:

Order options

Request this print as-is or ask for custom sizing, colors, finish, quantity, or themed paint work.

Print This More in This Category Back to Catalog

Matched set

Jewelry & Wearable Accessories Drop #271 Collection

This item belongs to the same STLFlix drop as these related pieces. Many drops are designed as collections, companion displays, scenes, game accessories, or themed sets.

View Full Drop