Product information
Desk Temptation Pen and Sticky Notes Holder
Hard to resist and impossible to ignore. Keeps pens and notes right within reach.
- Item number
- DMC-STL-000421
- Category
- Desk Organization & Office Tools
- STL catalog #
- 3709
- Drop collection
- Drop #300
- Approx. size
- Height: 22,5 cm
- Print time
- 06 Hours 49 Minutes
- Multipart time
- 06 Hours 29 Minutes
- Multicolor time
- Not listed
- Nozzle
- 0.4 mm
- Layer height
- 0.2 mm
- Walls
- 3
- Infill
- 5% (Grid)
- Supports
- Yes, you’ll need to use on both parts of the Hair and Body on monocolor and multicolor, and also on the Lava_03, Lava_06 and Head on multipart
- Plate adhesion
- Yes, you’ll need to use Brim on the pen
- Hardware
- BIC Ballpoint Pen (You will only use the Pen Refill) - Mercado Livre | Amazon
- Material options
- PLA, PETG, Matte PLA
desk organizerofficeholder
Production notes
(FOR 0.4 MM NOZZLE) Line Width/ Nozzle: 0.4 mm First Layer Line Width: 0.48 mm / 120% Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab) Recommended Initial Layer Height: 0.2 mm Recommended Layer Height: 0.2 mm Recommended Perimeters/ Walls: 3. Recommended Infill (%): 5% (Grid) Needs Support: Yes, you’ll need to use on both parts of the Hair and Body on monocolor and multicolor, and also on the Lava_03, Lava_06 and Head on multipart. Build Plate Adhesion: Yes, you’ll need to use Brim on the pen.
Order options
Request this print as-is or ask for custom sizing, colors, finish, quantity, or themed paint work.