Product detail

Going Bananas Dual Controller Grip

Item DMC-STL-000829 · Automotive & Vehicle Accessories · Drop #114

Automotive & Vehicle AccessoriesEstimated from $19.99STL #3282Drop #114

Ready to print this?

Choose size, material, color, finish, and quantity on the quote request.

Print This

Product information

Going Bananas Dual Controller Grip

Two hands, one bunch. Hold tight, laugh harder.

Item number: DMC-STL-000829
Category: Automotive & Vehicle Accessories
STL catalog #: 3282
Drop collection: Drop #114
Approx. size: Height: 13 cm
Print time: 05 Hours 59 Minutes
Multipart time: 08 Hours 58 Minutes
Multicolor time: Not listed
Nozzle: 0.4 mm
Layer height: 0.2 mm
Walls: 3
Infill: 5% (Gyroid)
Supports: Only for Cases (Tree)
Plate adhesion: Brim (Only for spots)
Hardware: Not listed
Material options: PETG, PLA, Matte PLA

Production notes

The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
(FOR 0.4 MM NOZZLE) Line Width/ Nozzle: 0.4 mm First Layer Line Width: 0.48 mm / 120% Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab) Recommended Initial Layer Height: 0.2 mm Recommended Layer Height: 0.2 mm Recommended Perimeters/ Walls: 3. Recommended Infill (%): 5% (Gyroid) Needs Support: Only for Cases (Tree) . Build Plate Adhesion: Brim (Only for spots). Others:

Order options

Request this print as-is or ask for custom sizing, colors, finish, quantity, or themed paint work.

Print This More in This Category Back to Catalog

Matched set

Automotive & Vehicle Accessories Drop #114 Collection

This item belongs to the same STLFlix drop as these related pieces. Many drops are designed as collections, companion displays, scenes, game accessories, or themed sets.

View Full Drop