Product information
Hang More
A little more room for your daily chaos. Comes with a keyholder, sticky note holder, glasses holder, and two hangers, perfect for keeping your essentials within reach.
- Item number
- DMC-STL-000675
- Category
- Storage, Racks & Home Organization
- STL catalog #
- 3449
- Drop collection
- Drop #276
- Approx. size
- Height: 66 cm (assembled files)
- Print time
- 09 Hours
- Multipart time
- Not listed
- Multicolor time
- Not listed
- Nozzle
- 0.4 mm
- Layer height
- 0.20 mm
- Walls
- 3 walls
- Infill
- 10% (Gyroid)
- Supports
- Yes, (Painted Grid) only in “Male Joints” fit
- Plate adhesion
- Yes
- Hardware
- 02 x Neodymium Magnets (6 x 3 mm round) - Mercado Livre - Amazon - Aliexpress
- Material options
- PETG, PLA, Matte PLA
rackhome organizationutility
Production notes
We use (Archimedean Chords) for finishing the top layers.
(FOR 0.4 MM NOZZLE) Line Width/ Nozzle: 0.4 mm First Layer Line Width: 0.48 mm / 120% Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab) Recommended Initial Layer Height: 0.20 mm Recommended Layer Height: 0.20 mm Others: We use (Archimedean Chords) for finishing the top layers. Recommended Perimeters/ Walls: 3 walls Recommended Infill (%): 10% (Gyroid) Needs Support: Yes, (Painted Grid) only in “Male Joints” fit. Build Plate Adhesion: Yes. (Painted Brim) only in the smallest parts with low bed adhesion. Others:
Order options
Request this print as-is or ask for custom sizing, colors, finish, quantity, or themed paint work.
