Product information
Horn of Light Table Lamp
A cheerful unicorn with a gentle glow and a touch of magic. Bright enough to charm the room, soft enough to keep things calm and cozy.
- Item number
- DMC-STL-000395
- Category
- Lamps & Lighting
- STL catalog #
- 3735
- Drop collection
- Drop #303
- Approx. size
- Height: 18 cm
- Print time
- 06 Hours 07 Minutes
- Multipart time
- 08 Hours 32 Minute
- Multicolor time
- Not listed
- Nozzle
- 0.4 mm
- Layer height
- 0.2 mm
- Walls
- 2 walls
- Infill
- 5% Gyroid
- Supports
- No
- Plate adhesion
- No
- Hardware
- a cable with a plug that is compatible with your region. You can weld the internal cables of the light. Always use LED light sources to avoid damaging your light fixture.
- Material options
- PLA, PETG, Translucent PLA, Matte PLA
lamplightingdecor
Production notes
(FOR 0.4 MM NOZZLE) - BASE Line Width/ Nozzle: 0.4 mm First Layer Line Width: 0.48 mm / 120% Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab) Recommended Initial Layer Height: 0.2 mm Recommended Layer Height: 0.2 mm Recommended Perimeters/ Walls: 2 walls Recommended Infill (%): 5% Gyroid Needs Support: No. Build Plate Adhesion: No. 3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE) - LIGHT Line Width/ Nozzle: 0.4 mm First Layer Line Width: 0.48 mm / 120% Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab) Recommended Initial Layer Height: 0.2 mm Recommended Layer Height: 0.2 mm Recommended Perimeters/ Walls: 3 walls Recommended Infill (%): 0% (Grid) Needs Support: Yes (Tree) Wall Generator: Aracne. Infill/Wall Overlap: 0% Build Plate Adhesion: Brim. ****For better top layers use VARIABLE LAYER HEIGTH****
Order options
Request this print as-is or ask for custom sizing, colors, finish, quantity, or themed paint work.
