Kitty Carry Container and Photocard

Item DMC-STL-000520 · Cat-Themed Prints · Drop #291

Cat-Themed PrintsEstimated from $19.99STL #3607Drop #291

Ready to print this?

Choose size, material, color, finish, and quantity on the quote request.

Print This

Product information

Kitty Carry Container and Photocard

A purrfect little charm with a cat-themed lipstick case, a playful photocard, and a matching kitty clip. Soft, sweet, and ready to follow you everywhere.

Item number: DMC-STL-000520
Category: Cat-Themed Prints
STL catalog #: 3607
Drop collection: Drop #291
Approx. size: Height: 15 cm
Print time: 04 Hours 13 Minutes
Multipart time: 05 Hours 44 Minutes
Multicolor time: 20 Hours 03 Minutes
Nozzle: 0.4 mm
Layer height: 0.2 mm
Walls: 3
Infill: 5% (Gyroid)
Supports: No
Plate adhesion: Brim (Only for small pieces)
Hardware: For the Keychains: Split Key Ring with Chain - AliExpress - Amazon - Mercado Livre
Material options: PLA, Matte PLA, PETG

Production notes

The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
(FOR 0.4 MM NOZZLE) Line Width/ Nozzle: 0.4 mm First Layer Line Width: 0.48 mm / 120% Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab) Recommended Initial Layer Height: 0.2 mm Recommended Layer Height: 0.2 mm Recommended Perimeters/ Walls: 3. Recommended Infill (%): 5% (Gyroid) Needs Support: No. Build Plate Adhesion: Brim (Only for small pieces). Others:

Order options

Request this print as-is or ask for custom sizing, colors, finish, quantity, or themed paint work.

Print This More in This Category Back to Catalog

Matched set

Containers, Boxes & Storage Drop #291 Collection

This item belongs to the same STLFlix drop as these related pieces. Many drops are designed as collections, companion displays, scenes, game accessories, or themed sets.

View Full Drop