Product information
Left Winger
Cuts in, lines it up, and goes for goal. Every move feels like a highlight.
- Item number
- DMC-STL-000106
- Category
- Sports & Soccer Prints
- STL catalog #
- 4022
- Drop collection
- Drop #326
- Approx. size
- Height: 9 cm
- Print time
- 05 Hours 59 Minutes
- Multipart time
- Not listed
- Multicolor time
- Not listed
- Nozzle
- 0.4 mm
- Layer height
- 0.2 mm
- Walls
- 3
- Infill
- 5% (Grid)
- Supports
- No
- Plate adhesion
- Yes
- Hardware
- Not listed
- Material options
- PLA, PETG, Matte PLA
sportssoccergift
Production notes
To improve the finish and make the design more attractive, draw the stitching on the shirt and socks along the sides, mimicking real clothing.
(FOR 0.4 MM NOZZLE) Line Width/ Nozzle: 0.4 mm First Layer Line Width: 0.48 mm / 120% Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab) Recommended Initial Layer Height: 0.2 mm Recommended Layer Height: 0.2 mm Recommended Perimeters/ Walls: 3. Recommended Infill (%): 5% (Grid) Needs Support: No. Build Plate Adhesion: Yes. Outer brim only. Others: To improve the finish and make the design more attractive, draw the stitching on the shirt and socks along the sides, mimicking real clothing. Goal and Soccer Ball 3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE) Line Width/ Nozzle: 0.4 mm First Layer Line Width: 0.48 mm / 120% Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab) Recommended Initial Layer Height: 0.2 mm Recommended Layer Height: 0.2 mm Recommended Perimeters/ Walls: 3. Recommended Infill (%): 5% (Grid) Needs Support: No. Build Plate Adhesion: Yes. Only on the "Pin" of the soccer ball.
Order options
Request this print as-is or ask for custom sizing, colors, finish, quantity, or themed paint work.
