Lumen Table Lamp

Item DMC-STL-000583 · Lamps & Lighting · Drop #125

Lamps & LightingEstimated from $29.99STL #3541Drop #125

Ready to print this?

Choose size, material, color, finish, and quantity on the quote request.

Print This

Product information

Lumen Table Lamp

A soft, glowing presence designed for intimate corners. Lumen emits a gentle, steady radiance that warms the room and brings calm to any surface it rests on.

Item number: DMC-STL-000583
Category: Lamps & Lighting
STL catalog #: 3541
Drop collection: Drop #125
Approx. size: Height: 27 cm
Print time: 10 Hours 33 Minutes
Multipart time: Not listed
Multicolor time: Not listed
Nozzle: 0.4 mm
Layer height: 0.2 mm
Walls: 3
Infill: 5% (Gyroid)
Supports: Yes (Only for End Light Module)
Plate adhesion: No
Hardware: a cable with a plug that is compatible with your region. You can weld the internal cables of the light or simply insulate them with electrical tape.
Material options: PLA, PETG, Translucent PLA, Matte PLA

Production notes

The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
(FOR 0.4 MM NOZZLE) Line Width/ Nozzle: 0.4 mm First Layer Line Width: 0.48 mm / 120% Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab) Recommended Initial Layer Height: 0.2 mm Recommended Layer Height: 0.2 mm Recommended Perimeters/ Walls: 3. Recommended Infill (%): 5% (Gyroid) Needs Support: Yes (Only for End Light Module). Build Plate Adhesion: No. Others:

Order options

Request this print as-is or ask for custom sizing, colors, finish, quantity, or themed paint work.

Print This More in This Category Back to Catalog

Matched set

Lamps & Lighting Drop #125 Collection

This item belongs to the same STLFlix drop as these related pieces. Many drops are designed as collections, companion displays, scenes, game accessories, or themed sets.

View Full Drop