Peel Boy

Item DMC-STL-000859 · Food Characters & Novelty Prints · Drop #113

Food Characters & Novelty PrintsEstimated from $19.99STL #3264Drop #113

Ready to print this?

Choose size, material, color, finish, and quantity on the quote request.

Print This

Product information

Peel Boy

A bit silly, but gets the job done. Slips in, cleans out your trash, and vanishes like smoke.

Item number: DMC-STL-000859
Category: Food Characters & Novelty Prints
STL catalog #: 3264
Drop collection: Drop #113
Approx. size: Height: 6 cm (assembled)
Print time: Not listed
Multipart time: 01 Hours 37 Minutes
Multicolor time: 14 Hours 57 Minutes
Nozzle: 0.4 mm
Layer height: 0.2 mm
Walls: 3
Infill: 5% (Gyroid)
Supports: No
Plate adhesion: Yes, small multipart parts
Hardware: Split Key Ring with Chain; AliExpress - Amazon - Mercado Livre
Material options: PLA, PETG, Matte PLA

Production notes

The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
(FOR 0.4 MM NOZZLE) Line Width/ Nozzle: 0.4 mm First Layer Line Width: 0.48 mm / 120% Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab) Recommended Initial Layer Height: 0.2 mm Recommended Layer Height: 0.2 mm Recommended Perimeters/ Walls: 3. Recommended Infill (%): 5% (Gyroid) Needs Support: No. Build Plate Adhesion: Yes, small multipart parts. Others:

Order options

Request this print as-is or ask for custom sizing, colors, finish, quantity, or themed paint work.

Print This More in This Category Back to Catalog

Matched set

Food Characters & Novelty Prints Drop #113 Collection

This item belongs to the same STLFlix drop as these related pieces. Many drops are designed as collections, companion displays, scenes, game accessories, or themed sets.

View Full Drop