Press the Pig

Item DMC-STL-000526 · Animal & Creature Collectibles · Drop #128

Animal & Creature CollectiblesEstimated from $19.99STL #3603Drop #128

Ready to print this?

Choose size, material, color, finish, and quantity on the quote request.

Print This

Product information

Press the Pig

Squish this little piggy and watch it run over! A springy snout and curly tail make this oinker irresistible. Liked what you see? This model was designed by @angeljacobofigueroa

Item number: DMC-STL-000526
Category: Animal & Creature Collectibles
STL catalog #: 3603
Drop collection: Drop #128
Approx. size: Height: 4 cm
Print time: Not listed
Multipart time: Not listed
Multicolor time: Not listed
Nozzle: 0.4 mm
Layer height: 0.2 mm
Walls: 3
Infill: 5% (Gyroid)
Supports: No
Plate adhesion: No
Hardware: Not listed
Material options: PLA, Matte PLA, Resin

Production notes

(FOR 0.4 MM NOZZLE) Line Width/ Nozzle: 0.4 mm First Layer Line Width: 0.48 mm / 120% Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab) Recommended Initial Layer Height: 0.2 mm Recommended Layer Height: 0.2 mm Recommended Perimeters/ Walls: 3. Recommended Infill (%): 5% (Gyroid) Needs Support: No. Build Plate Adhesion: No.

Order options

Request this print as-is or ask for custom sizing, colors, finish, quantity, or themed paint work.

Print This More in This Category Back to Catalog

Matched set

Dog-Themed Prints Drop #128 Collection

This item belongs to the same STLFlix drop as these related pieces. Many drops are designed as collections, companion displays, scenes, game accessories, or themed sets.

View Full Drop