Product information
Fortress Stacks Puzzle
Build a fortress one block at a time and see who shows up along the way. Knights, gargoyles, catapults: the castle fills up as the story grows.
- Item number
- DMC-STL-000045
- Category
- Games, Puzzles & Brain Teasers
- STL catalog #
- 4099
- Drop collection
- Drop #334
- Approx. size
- Height: 5 cm
- Print time
- 02 Hours 35 Minutes
- Multipart time
- 07 Hours 14 Minutes
- Multicolor time
- 13 Hours 16 Minutes
- Nozzle
- 0.4 mm
- Layer height
- 0.2 mm
- Walls
- 3
- Infill
- 3% (Gyroid)
- Supports
- No
- Plate adhesion
- Yes
- Hardware
- Not listed
- Material options
- PLA, PETG, Matte PLA
gamepuzzlefidget
Production notes
(FOR 0.4 MM NOZZLE) Line Width/ Nozzle: 0.4 mm First Layer Line Width: 0.48 mm / 120% Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab) Recommended Initial Layer Height: 0.2 mm Recommended Layer Height: 0.2 mm Recommended Perimeters/ Walls: 3. Recommended Infill (%): 3% (Gyroid) Needs Support: No. Build Plate Adhesion: Yes. Outer brim only “Door_Tower”. Defense This STL file is recommended for FDM Printers! 3D Printing Time : Monocolor - 57 Minutes* (may vary according to your printer model) Approximately Height: 2 cm *Note: Printing time based on a Bambu P1s printer, according to our tests. 3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE) Line Width/ Nozzle: 0.4 mm First Layer Line Width: 0.48 mm / 120% Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab) Recommended Initial Layer Height: 0.2 mm Recommended Layer Height: 0.2 mm Recommended Perimeters/ Walls: 3. Recommended Infill (%): 3% (Gyroid) Needs Support: No. Build Plate Adhesion: Yes. Brim Ear.
Order options
Request this print as-is or ask for custom sizing, colors, finish, quantity, or themed paint work.
