The Webspinner Dice Tower

Item DMC-STL-000214 · Games, Puzzles & Brain Teasers · Drop #6

Games, Puzzles & Brain TeasersEstimated from $19.99STL #3904Drop #6

Ready to print this?

Choose size, material, color, finish, and quantity on the quote request.

Print This

Product information

The Webspinner Dice Tower

A giant spider waits patiently for its next victim. Drop your dice in and watch them rattle through the creature before spilling onto the table.

Item number: DMC-STL-000214
Category: Games, Puzzles & Brain Teasers
STL catalog #: 3904
Drop collection: Drop #6
Approx. size: Length: 15 cm
Print time: 04 Hours 55 Minutes
Multipart time: Not listed
Multicolor time: Not listed
Nozzle: 0.4 mm
Layer height: 0.2 mm
Walls: 3
Infill: 5% (Gyroid)
Supports: No
Plate adhesion: No
Hardware: Not listed
Material options: PLA, PETG, Matte PLA

Production notes

The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
(FOR 0.4 MM NOZZLE) Line Width/ Nozzle: 0.4 mm First Layer Line Width: 0.48 mm / 120% Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab) Recommended Initial Layer Height: 0.2 mm Recommended Layer Height: 0.2 mm Recommended Perimeters/ Walls: 3. Recommended Infill (%): 5% (Gyroid) Needs Support: No. Build Plate Adhesion: No. Others:

Order options

Request this print as-is or ask for custom sizing, colors, finish, quantity, or themed paint work.

Print This More in This Category Back to Catalog

Matched set

Card, Dice & Tabletop Accessories Drop #6 Collection

This item belongs to the same STLFlix drop as these related pieces. Many drops are designed as collections, companion displays, scenes, game accessories, or themed sets.

View Full Drop