Product information
Prismheart Table Lamp
A tiny dragon born from pure shimmer, glowing with soft, shifting colors that make its little egg feel enchanted.
- Item number
- DMC-STL-000548
- Category
- Lamps & Lighting
- STL catalog #
- 3582
- Drop collection
- Drop #288
- Approx. size
- Height: 18 cm
- Print time
- 15 Hours 34 Minutes
- Multipart time
- 16 Hours 21 Minutes
- Multicolor time
- Not listed
- Nozzle
- 0.4 mm
- Layer height
- 0.16 mm
- Walls
- 2 walls
- Infill
- 2% (Concentric) in the egg and 5% (gyroid) in the base
- Supports
- No
- Plate adhesion
- No
- Hardware
- a cable with a plug that is compatible with your region. You can weld the internal cables of the light. Always use LED light sources to avoid damaging your light fixture.
- Material options
- PLA, PETG, Translucent PLA, Matte PLA
lamplightingdecor
Production notes
(FOR 0.4 MM NOZZLE) - EGG AND BASE Line Width/ Nozzle: 0.4 mm First Layer Line Width: 0.48 mm / 120% Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab) Recommended Initial Layer Height: 0.16 mm Recommended Layer Height: 0.16 mm Recommended Perimeters/ Walls: 2 walls Recommended Infill (%): 2% (Concentric) in the egg and 5% (gyroid) in the base Needs Support: No. Build Plate Adhesion: No. 3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE) - DRAGON AND ADAPTER Line Width/ Nozzle: 0.4 mm First Layer Line Width: 0.48 mm / 120% Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab) Recommended Initial Layer Height: 0.16 mm Recommended Layer Height: 0.16 mm Recommended Perimeters/ Walls: 3 walls Recommended Infill (%): 3% (Grid) Needs Support: No. Build Plate Adhesion: Brim only on “Diamonds”.
Order options
Request this print as-is or ask for custom sizing, colors, finish, quantity, or themed paint work.
