Product information
Thunder Bringer Table Lamp
This spark-charged dragonling sleeps in a crackling storm egg, humming with the calm before the lightning.
- Item number
- DMC-STL-000550
- Category
- Lamps & Lighting
- STL catalog #
- 3578
- Drop collection
- Drop #288
- Approx. size
- Height: 18,5 cm
- Print time
- 14 Hours 59 Minutes
- Multipart time
- 15 Hours 27 Minutes
- Multicolor time
- Not listed
- Nozzle
- 0.4 mm
- Layer height
- 0.16 mm
- Walls
- 2 walls
- Infill
- 2% (Concentric) in the egg and 5% (gyroid) in the base
- Supports
- No
- Plate adhesion
- No
- Hardware
- a cable with a plug that is compatible with your region. You can weld the internal cables of the light. Always use LED light sources to avoid damaging your light fixture.
- Material options
- PLA, PETG, Translucent PLA, Matte PLA
lamplightingdecor
Production notes
(FOR 0.4 MM NOZZLE) - EGG AND BASE Line Width/ Nozzle: 0.4 mm First Layer Line Width: 0.48 mm / 120% Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab) Recommended Initial Layer Height: 0.16 mm Recommended Layer Height: 0.16 mm Recommended Perimeters/ Walls: 2 walls Recommended Infill (%): 2% (Concentric) in the egg and 5% (gyroid) in the base Needs Support: No. Build Plate Adhesion: No. 3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE) - DRAGON AND ADAPTER Line Width/ Nozzle: 0.4 mm First Layer Line Width: 0.48 mm / 120% Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab) Recommended Initial Layer Height: 0.16 mm Recommended Layer Height: 0.16 mm Recommended Perimeters/ Walls: 3 walls Recommended Infill (%): 3% (Grid) Needs Support: No. Build Plate Adhesion: Brim only on “Horns”.
Order options
Request this print as-is or ask for custom sizing, colors, finish, quantity, or themed paint work.
