Product information
Snap Car
A compact ride built piece by piece. Snap the magnetic parts together and create a fun little car ready to cruise across the table, the floor, or wherever the next adventure starts.
- Item number
- DMC-STL-000222
- Category
- Vehicles & Mechanical Toys
- STL catalog #
- 3900
- Drop collection
- Drop #314
- Approx. size
- Height: 4 cm
- Print time
- 03 Hours 53 Minutes
- Multipart time
- 07 Hours 12 Minutes
- Multicolor time
- 11 Hours 15 Minutes
- Nozzle
- 0.4 mm
- Layer height
- 0.2 mm
- Walls
- 3
- Infill
- 5% (Gyroid)
- Supports
- No
- Plate adhesion
- Yes
- Hardware
- 18 Neodymium Magnetic Size 8x3mm - AliExpress - Amazon - Mercado Livre
- Material options
- PLA, PETG, Matte PLA
vehiclemechanical toycollectible
Production notes
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
(FOR 0.4 MM NOZZLE) Line Width/ Nozzle: 0.4 mm First Layer Line Width: 0.48 mm / 120% Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab) Recommended Initial Layer Height: 0.2 mm Recommended Layer Height: 0.2 mm Recommended Perimeters/ Walls: 3. Recommended Infill (%): 5% (Gyroid) Needs Support: No. Build Plate Adhesion: Yes. External Brim. Others:
Order options
Request this print as-is or ask for custom sizing, colors, finish, quantity, or themed paint work.
