Product information
Snap Truck
Bigger, stronger, and ready to haul. Assemble the magnetic parts to build a sturdy truck that looks like it’s prepared to carry anything your imagination loads onto it.
- Item number
- DMC-STL-000223
- Category
- Vehicles & Mechanical Toys
- STL catalog #
- 3901
- Drop collection
- Drop #314
- Approx. size
- Height: 5 cm
- Print time
- 05 Hours 01 Minutes
- Multipart time
- 01 Hours 36 Minutes
- Multicolor time
- 09 Hours 46 Minutes
- Nozzle
- 0.4 mm
- Layer height
- 0.2 mm
- Walls
- 3
- Infill
- 5% (Gyroid)
- Supports
- No
- Plate adhesion
- Yes
- Hardware
- 14 Neodymium Magnetic Size 8x3mm - AliExpress - Amazon - Mercado Livre
- Material options
- PLA, PETG, Matte PLA
vehiclemechanical toycollectible
Production notes
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
(FOR 0.4 MM NOZZLE) Line Width/ Nozzle: 0.4 mm First Layer Line Width: 0.48 mm / 120% Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab) Recommended Initial Layer Height: 0.2 mm Recommended Layer Height: 0.2 mm Recommended Perimeters/ Walls: 3. Recommended Infill (%): 5% (Gyroid) Needs Support: No. Build Plate Adhesion: Yes. External Brim. Others:
Order options
Request this print as-is or ask for custom sizing, colors, finish, quantity, or themed paint work.
